Tech Tip Triple Play - RV Enthusiast Magazine

Tech Tip Triple Play

by | Jun 21, 2024 | Pro Tip, RVEXPERT

Photos by author
A little preventive maintenance and the creative use of readily available product counterparts can save the day — and your trip.

Sometimes little things can make a big difference. Over the years I’ve discovered simple solutions to situations that usually rear their ugly heads in the most inopportune times — and have the potential of impacting any trip. The Internet (and, specifically, Amazon) has made it easy to find things that can be used in unorthodox ways to solve problems and improve the longevity of items that can create big snags when they fail. Here are three quick tips that can alleviate problems on your next adventure.

Pinned Down

Entry steps that fold down from the doorway and provide solid contact with the ground have revolutionized how we get in and out of our RVs. Beyond the additional support these steps provide — and the improved safety factor — the adjustable legs make it easy to stabilize the steps on uneven terrain. The pins that hold the step assembly in place on Lippert’s Solid Step system do a great job of immobilizing the inner braces — but grabbing onto the end to remove them can be difficult for those with short (or soft) fingernails. Replacing these pins with a counterpart that has a spring-loaded ball-and-grab ring provides a much better grip.

While spring-loaded-ball pins are are common, Amazon sells a ¼-inch (diameter) pin that’s 3 inches long (2.4-inch effective length) that fits perfectly. Just search Amazon for “2 Pack Quick Release Pin” and you should find the product listed ($7.99). These pins are designed for boat Bimini tops and are made of marine grade 316 stainless steel.

Pulling the pins with the grab rings makes it much easier to adjust the legs without having to reach for a flat blade to get a good grip.

cropped view of feet walking down the foldable entry steps of an RV
Entry steps that fold down from the doorway provide better support when going in and out of an RV. Adjustable legs that are pinned in place make it possible to level the step on uneven ground.
close view of an index finger attempting to remove a lipped factory pin from an RV exterior
The factory pins do a good job of securing the legs, but when the lip is against the frame, they are difficult to lift to get a good enough grip for removal. Strong fingernails will help, but most times a flat blade is needed to assist.
close view of two spring-loaded-ball pins
close view of an index finger looped around the pull ring of a spring-loaded-ball pin on the exterior of an RV
The solution is to replace the factory pins with spring-loaded-ball counterparts that have a pull ring for easy gripping. These pins are available on Amazon for $7.99 and are a game changer.

A Less-Than-Mighty Wind

Over time, rust that builds on the inside of the burner tube in the back of an absorption RV refrigerator can impact performance — and it’s hard to access all the nooks and crannies with a brush to remove the offending accumulations. Compressed air will do the job, but not everyone has a compressor onboard — and using pressure that’s too high can cause damage.

Canned air is the fast and easy solution.

Compressed air, packaged in a can and earmarked for cleaning electronic devices and keyboards, can be directed into the burner tube once the cover — accessed via the lower ventilated panel on the RV sidewall—is removed. The straw-type nozzle can be pinpointed directly at any rust build-up, which will be blown away from the area quickly. Falcon Dust-Off Electronic Duster, one such product, is well-known within the electronics community and a two-pack can be purchased on Amazon for $13.60. It’s actually rather expensive air based on the 10-ounce can (other size cans are also available), but it’s convenient and you won’t use that much at a time. There are other canned air products on the market which are less expensive, but we’ve had good luck with Dust-Off.

An added benefit: You’ll likely find many other uses for canned air in small areas around the RV.

an index finger points to a tight area within an RVs components that holds dirt and debris
Rust build-up in the burner tube is common in absorption RV refrigerators. Failure to keep the burner tube free of rust will ultimately impact performance.
a hand holds a container of Falcon Dust-Off Electronic Duster up right in a displaying fashion
cropped view of the red straw of the Falcon Dust-Off Electronic Duster container as it is pointed and sprayed at an area of filled with dirt and debris
Falcon Dust-Off Electronic Duster makes it easy to direct the flow of compressed air into tight places. It doesn’t take much airflow to blow out the rust and other debris.
cropped view of the red straw of the Falcon Dust-Off Electronic Duster container placed into an RV's burner tube
The straw-type nozzle can be directed right into the burner tube, which will blow out any rust that has settled in the area.

Plugging and Unplugging

Plugging in an appliance or accessory to a 120-volt AC outlet is so common that most of us never even think about the process. Over time, though, the prongs can wear due to metal-to-metal contact — and result in a bad connection or arcing. This is more of a problem when the appliance is connected and disconnected from an outlet on a constant basis (common when RVing). Protecting the plug blades is as simple as applying a thin coating of dielectric grease.

Among car buffs, Permatex Tune-Up Dielectric Grease is a household product used to repel dirt, salt and corrosion — and it works well to help protect common 120-volt AC plugs as well. Amazon sells the dielectric grease for around $9 and it comes in a 3-ounce tube.

Dielectric grease can be used for several electronic applications and makes using household plugs work smooth as silk while preserving the integrity of the connection.

wide view of an RV galley counter top holding an induction hot plate and a toaster, a hand holds the plugs for both appliances near a galley wall outlet
Plugs for appliances and accessories that are frequently connected to 120-volt AC power can result in blade wear — which can lead to a bad connection and arcing.
a hand holds an appliance plug beside a tube of Permatex Tune-Up Dielectric Grease
Permatex Tune-Up Dielectric Grease is commonly used by automotive mechanics, but it does a good job repelling salt, corrosion and dirt — all of which can impact continuity.
an index finger applies a thin layer of dielectric grease to an appliance plug
When applied to the blades in the plugs, dielectric grease will promote smoothness and longevity. It only takes a thin layer of dielectric grease; too much just makes a mess.
Get Updates
Subscribe today and never miss an issue!
Get all the latest tips and news to keep you moving on that open road!
RV Enthusiast April 2024 Issue
Current Issue
April 2024
No fooling, it's here–our latest issue of RV Enthusiast! The April issue covers 2024's Newest Parts & Accessories, RV OEMs Debut New Entry-Level Towables, an in-depth slideout floor replacement, PLUS so much more!

Already a Subscriber? Click here for Access to the Full Issues.

Share This